Light Up your night
LED flashlights are the most intelligent feature ever. No matter day or night, revive your dead battery with Powerology portable car jump starter. Brings light to darkness with the 3W, 200 lumens embedded flashlight. A useful option in the jump starter to make it functional even at night. It can be beneficial camping while you need light to chill out.
Compatible with petrol and diesel engines
Getting into your car and finding out the battery’s dead can really make a sad day for you. If you believe jumper cables are the only solution to that problem, think again. Powerology portable car jump starter will get your car going without needing another vehicle for a jump. 6L diesel and 7L petrol engines are both compatible with this car jumper. Wide compatibility with wide functionality will let you use Powerology portable car jump starters in the most beneficial way.
Different ports
nowadays portable car jump starters have become really popular, however, this one also can be used as power banks for your devices. Two USB output ports give you the option to charge your phone or tablet fully charged on the go. One 12V output acts as a car cigarette lighter for your devices to be charged. One input for charging, whether with a home or car adapter. The last port is specialized for jump starter sockets to be fully charged.
Installation Process
- Connect the blue plug fully seated into the host, and make sure the Cable Indicator is off.
- Connect Red Clamp to the positive (+) battery terminal, and the Black Clamp to the negative (-) battery terminal.
- Operate following the instruction of the Cable Indicator:
Green Light on
Telling the connection is correct and the circuit is working, you can turn on the engine to jumpstart directly.
Red Light on with Buzzing
Telling the connection is wrong and buzzing to the alarm to correct the clamps as step 2 mentioned above, wait until the green light is on to turn on the engine.
Green Light Blinking with Buzzing
Saying the vehicle battery is low, press the “Boost “button, wait for the green light to become solid, then turn on the engine within 30 seconds.
No light on with no buzzing
Saying the vehicle’s battery may be damaged, after confirming the connection of the clamps is correct, press the: “BOOST” button, wait for the green light to be on, and then turn on the engine within the 30s.
4. Start the Vehicle
5. When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle's engine running.
Safety Notes
- Always make sure the blue plug of the jumper cable connects with the jump start socket tight in Jumpstart before jump-starting the vehicle. Otherwise, it will affect the results, even causing the melt of the blue plug.
- Always check if the jumper clamps are well connected. check if the vehicle battery connector is rusted or dirty and clean it before jumping start the vehicle.
- DO NOT jump start again after 3 attempts. Otherwise, it will damage the host
- DO NOT connect the two clamps. Otherwise, it may be dangerous!
- DO NOT disassemble the host. Otherwise, it may be dangerous!
Features
- Compatible with petrol and diesel engines
- Equipped with Led flashlight
- 500A Starting with 1000A Max Current
- Dual USB Output Mobile Charging
- 12V Output for Appliances
Specification
- Battery: 25000mAh
- Battery Type: Li-ion 92.5Wh
- input: 15V/ 1A
- USB Output: 5V/ 2A Max
- DC Output: 12V/ 10A
- Max Current: 1000A
- Product Weight: 890g
- Product Dimension: 18.8 * 13 * 3.7cm
- Operation Temperature: -20°C to 60°C
You may also like